Surya Home Collection

• Panasonic (formerly Sunx) Compound Pressure and Vacuum Sensor with Digital Display


• Low Pressure, Standard Function Version


• Pressure Range: -14.64 to +146.4 psi


• PNP output


• M5 Female and NPT1/8 Thread. (Pressure port common in North America)

• Induction Heat Sensor with Teflon Cap Cable Connector Glass Sealed Diode
• East to install with JST Wire Connector
• Induction Heat Sensor for Repair and Replacement
• PLEASE HIRE THE PROFESSINAL PERSON WHO HAVE QUALIFICATION CERTIFICATE TO INSTALL, IT IS IMPORTANT TO REST WITH ELECTRICITY BEFORE INSTALL, AND MISTAKES CAUSED BY INSTALLATION OF THE DAMAGE, IT IS NOT WARRANTY

• Safety lock buckle，Simple installation
• Audio connector output
• Lead type output，The length can be customized
• Suspended mounting

• Portable instrument
• Household metering
• Monitoring the load of the machine

• Small volume，Light weight
• Low cost
• High turns，High precision

• Core material—— ferrite
• Working voltage—— Phase voltage≤720V
• Working temperature——- 25℃～+60℃
• output /Outer shell AC 3.5KV/1min 5mA 50Hz
• Storage temperature——- 30℃～+90℃
• Frequency range—— 50Hz～1KHz
• Electrical resistance
  • input（Bare conductor）
  • output AC 800V/1min 5mA 50Hz

• RELIABLE RADON RESULTS: As radon levels fluctuate daily, continuous long-term measuring is necessary. Airthings Wave Plus measures radon accurately and reliably
• CLEAN AIR SENSORS: Radon, Carbon Dioxide (CO2), VOCs (airborne such as kitchen gases, fumes and cleaning products), humidity, temperature and air pressure sensors allow you to gain full visibility into six key indoor air factors
• EASY AND CLEAR RESULTS: Wave in front of the device for a color-coded visual indication or connect via Bluetooth to the Airthings App for detailed insights into your air
• DESIGNED IN NORWAY, TRUSTED BY THE WORLD: 15 years of experience in indoor radon and air quality monitoring and original industry leaders in radon gas detectors.
• WHAT YOU GET: Airthings Wave Plus, 2 AA batteries, Quick Start Guide, Airthings Support and optional

4 sub-systems, 2-way communication. Built-in 2G/4G module, support 2G/4G data transmission,built-in TCP/IP module. 32 appliance switch control, timing control. Patented Multi-Code no repeat holograph

P2P Cloud Server Free Usage

Now you can have a WIFI+GSM Alarm system which you can control from anywhere in the world. free download your mobile APP, No need to set up static IP address or configure the nework connection on-site. Just scan the QR code from the host panel sticker, directly remote Arm/Disarm, checking the system status and setting up notifications, video cameras on-site seeing. you can now have ultimate control of your home security whenever required.

Dual Network Connections, More Secure And Stable

The Host with 2G/4G, WIFI(2.4g). one key connect to the home router WIFI . 2G/4G network for backup network. 

With 8 WIFI Cameras 

From the APP, users can scan the QR code from the wifi cameras for 8 PCS, users can review the video at anytime, anywhere. It can snap the alarm picture, backup the alarm video to your smartphone.

SIA-TCP, SIA-UDP, Meian Private IP protocol

Support SIA-UDP, TCP Global standard Protocol. More effective docking way to compatible with customers CMS platform.

Seagull #RADIO is a fully configurable transceiver module designed for use in platforms where unrestricted data size and continuous communication is required, as well as long range – stretching up to 6 kilometers!

#RADIO is perfect solution to use as a telemetry module to transmit data back to the ground control software from your Flight Controller or use the modules with Seagull #GPK to handle RTCM data streams in order to achieve RTK FIX

Seagull #GPK supports the following functions

• BASE / ROVER ( #GPK can operate either as a BASE or ROVER )
• RTK (  Real Time Kinematic navigation rate – up to 8Hz )
• PPK (  Post Processed Kinematic navigation rate – up to 10Hz )
• MB ( Moving Baseline navigation rate – up to 4Hz )
• PVT GNSS ( Non-Kinematic navigation rate – up to 10Hz  )

The following hardware is supported

Flight Controllers:

• Pixhawk 1
• Pixhawk 2.1
• Pixracer
• APM 2.6
• APM 2.5

– all of the ardupilot based FCs’ are supported as well any FC that is capable of utilizing UBX/NMEA messages for navigation

Seagull:

• #MAP-X2
• #RADIO
• #SYNC2

• Powerful ESP32-S2-Saola-1 ]: ESP32-S2-Saola-1 is a small-sized development board based on ESP32-S2-WROVER module. It is a powerful, generic Wi-Fi MCU module that integrates ESP32-S2. It has a PCB antenna, a 4 MB external SPI flash and an additional 2 MB PSRAM.
• ✨[ Easy to Use ] : Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. You can either connect peripherals with jumper wires or mount ESP32-S2-Saola-1 on a breadboard.
• ✨[ Required Hardware ] : ESP32-S2-Saola-1 , USB 2.0 cable (Standard-A to Micro-B), Computer running Windows, Linux, or macOS. ESP32-S2 series of chips only supports ESP-IDF master or version v4.2 and higher.
• ✨[ What You Get ] : 1 X ESP32-S2-Saola-1R development board ; 1 X 1 Meter Micro USB Cable ; Friendly customer service. Any question please don't hasitate to contact us.

This ultrasonic sensor module can be used for measuring distance, object sensors, motion sensors, etc. The high sensitive module can be used with a microcontroller to integrate with motion circuits to make robotic projects and other distance, position & motion-sensitive products. The module sends eight 40Khz square wave pulses and automatically detects whether it receives the returning signal. If there is a signal returning,  a high-level pulse is sent on the echo pin. The length of this pulse is the time it took the signal from first triggering to the return echo.

• Used to avoid and detect obstacles with robots like biped robots, obstacle avoider robots, path finding robots, etc.
• Used to measure the distance within a wide range of 2cm to 400cm
• Can be used to map the objects surrounding the sensor by rotating it
• Depth of certain places like wells, pits, etc. can be measured since the waves can penetrate through the water

Supply module with 5V, the output will be 5V while obstacle in range, or 0V if not. The out pin of this module is used as a switching output when anti-theft module, and without the feet when ranging modules. Note: The module should be inserted in the circuit before being powered, which avoids producing a high level of misoperation; if not, then power again.

1. Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
2. Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
3. Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
4. Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
5. High precision
6. Capacitive type
7. Full range temperature compensated
8. Relative humidity and temperature measurement
9. Calibrated digital signal
10. Outstanding long-term stability

• The RF IC Card module design the circuit of card read by using the original Philips MFRC522 chip
• Easy to use, with pin header. The module can be directly loaded into the various reader molds.
• Applicable for the user who need to design or manufacture the RF card terminal.
• Module Interface: SPI? Data transfer rate: Maximum 10Mbit/s.
• Power Voltage : 3.3V,Operating frequency: 13.56MHz